TinySa Spectrum Analyser
815,00 kr
4 in stock
Quantity
Dispatched from Aarhus, Denmark. Shipping calculated at checkout.
Need help choosing? Ask us about your project
TinySa Spectrum Analyser
Standard
815,00 kr
Basic and Ultra are different models. The comparison below does not confirm both are stocked. Contact us for the exact model and hardware version before ordering. Ultra+ is different from Ultra ZS405.
tinySA Spectrum Analyser
Looking for a pocket-sized spectrum analyser with measurement ranges extending into the gigahertz range on supported models? Meet the tinySA – a compact spectrum analyser and signal generator for radio amateurs, engineers and electronics enthusiasts.
The tinySA is available in two versions: tinySA Basic and tinySA Ultra. The following sections describe their features so you can choose the appropriate model.
tinySA Basic
| Specification | Details |
|---|---|
| Screen size | 2.8 inches |
| Spectrum analyser input | Two inputs: - Higher-quality MF/HF/VHF input: 0.1MHz–350MHz - UHF input: 240MHz–960MHz (lower performance than the low-frequency input) |
| Signal generator output | When not used as a spectrum analyser: - Sine wave: 0.1MHz–350MHz - Square wave: 240MHz–960MHz |
| Bandwidth filters | Switchable resolution bandwidth filters from 2.6kHz to 640kHz |
| Display | Colour display with up to 290 scan points covering the selected frequency range |
| PC connection | USB connection for use as a PC-controlled spectrum analyser or signal generator |
| Battery | Rechargeable battery, minimum 2 hours of use |
| Maximum input level | +10dBm (do not overload the tinySA) |
| Note | The generator cannot be used as a tracking generator because the spectrum analyser and generator cannot operate simultaneously |
tinySA Ultra
| Specification | Details |
|---|---|
| Unit dimensions | Depends on actual Ultra revision; confirm enclosure dimensions before integration. |
| Display | 4-inch colour touchscreen,480 × 320 pixels, up to 450 measurement points. |
| Controls | Jog-switch control, USB serial port, optional TTL USART on the internal PCB |
| Power supply | Linear regulator to avoid switching noise; USB-C data and charging (≥500mA), rechargeable battery (minimum 2 hours of operation) |
| Spectrum analyser input (LF) | Ultra ZS405:100 kHz–800 MHz in normal mode.50 Ω with suitable attenuation;0–31 dB internal attenuator with LNA off. Maximum+6 dBm without internal attenuation; recommended at most 0 dBm with automatic attenuation. RBW 200 Hz–850 kHz; measurement performance depends on setup and calibration. |
| Spectrum analyser input (HF) | Ultra uses the same RF input in normal and Ultra modes, not the Basic separate high-frequency input. Ultra mode reaches up to 6 GHz with reduced accuracy above 5.3 GHz. Ultra+ has different limits; use the exact model documentation. |
| Output (LF) | Ultra ZS405: sine 100 kHz–800 MHz; output−115 to−19 dBm in 1 dB steps. Level accuracy depends on frequency and selected power. AM/FM and sweep are supported. |
| Output (HF) | Ultra ZS405 above 800 MHz: square-wave mode up to 4.4 GHz or an alternative mode up to 5.4 GHz with different spurious-signal and level limits. This is not a separate Basic HF output. |
| Reference Generator | Ultra: calibration output with fundamental around−35.6 dBm; selectable 1, 2, 4, 10, 15 or 30 MHz. |
| Notes | Follow the exact model input limits; add a correctly rated external attenuator and DC block where needed. Never connect a transmitter directly. The analyser and internal generator do not form a simultaneous tracking generator. |
What is included?
- 1x tinySA Basic or tinySA Ultra (depending on your selection)
- 1x USB cable for charging and PC connection
- 1x user manual
- Accessories such as antennas or cables may be included, depending on the package
Explore the radio spectrum with tinySA. Whether you choose Basic or Ultra, it provides a compact measurement tool for your workbench or field kit. Observe the input limits and use appropriate attenuation to avoid damaging the instrument.
Warranty and shipping
We do our best to test all electronics before sending them to you.
This helps us maintain quality and avoid unnecessary trouble during development. Faults can occur, but we encounter them very rarely. If there is a problem with the equipment you ordered, you can always contact us, and we will gladly help you resolve it.
We dispatch from Aarhus to Denmark and Sweden. Shipping options and prices are shown at checkout. Delivery time depends on availability, destination and shipping method; contact us before ordering if you need an item by a specific date.
