JXL 1.28-Inch IPS Colour TFT LCD Display Module
48,30 kr
69,00 kr
Sold out
Quantity
Dispatched from Aarhus, Denmark. Shipping calculated at checkout.
Need help choosing? Ask us about your project
JXL 1.28-Inch IPS Colour TFT LCD Display Module
48,30 kr
69,00 kr
A Round Display for Your Projects
Add a circular interface with this 1.28-inch TFT display module. The GC9A01 driver and 240×240 resolution provide images in 65K colours for creative electronics projects.
This IPS display uses 4-wire SPI communication and supports development platforms such as Arduino UNO, STM32F103XXXX and ESP32 with suitable wiring and software. It can be used for smartwatch-style interfaces or retro-inspired gadgets.
Technical specifications
| Specification | Value |
|---|---|
| Display type | IPS |
| Screen size | 1.28 inches (circular) |
| Resolution | 240 × 240 pixels |
| Pixel size | 0,135 × 0,135 mm |
| Display area | Diameter 32,4 mm |
| Operating current | 20mA (typical) |
| Operating voltage | 3,3 V / 5 V |
| Communication interface | 4-wire SPI |
| Interface model | PH2.0-8P / FPC0.5-8P |
| Connections | Supplied with a PH2.0-to-Dupont cable |
| Mounting method | M3 screw (attached to brass standoffs) |
| Module weight | 24 g |
| Module size | 36 × 38,8 × 9,4 mm |
Pin description
| Pin | Function |
|---|---|
| GND | Negative supply, ground |
| VCC | Positive supply (3.3V–5V); must be compatible with the communication voltage |
| SCL | SPI clock input |
| SDA | SPI data input |
| RES | Reset, active low |
| DC | Data/command selection (low: command, high: data) |
| CS | Chip select, active low |
| BLK | Backlight (pull up to 3.3V to enable, ground to turn off) |
Notes
-
Power supply and logic levels: The module is specified for 3.3V and 5V supplies with onboard level conversion. Supply and communication levels must be compatible. The supplier reports that 5V Arduino logic with a 3.3V supply does not work correctly, while ESP32 3.3V logic works with a 3.3V or 5V supply. Check the exact module revision before wiring.
-
Mounting: Use M3 screws to secure the module. The brass standoffs have through-holes and there is a metal backing beneath the screen. Ensure the screw extends into the standoff by no more than 6mm, as a longer screw can bend or crack the display.
What is included?
- 1x 1.28-inch circular TFT display module
- 1x PH2.0-to-Dupont cable
Warranty and shipping
We do our best to test all electronics before sending them to you.
This helps us maintain quality and avoid unnecessary trouble during development. Faults can occur, but we encounter them very rarely. If there is a problem with the equipment you ordered, you can always contact us, and we will gladly help you resolve it.
We dispatch from Aarhus to Denmark and Sweden. Shipping options and prices are shown at checkout. Delivery time depends on availability, destination and shipping method; contact us before ordering if you need an item by a specific date.
