Heltec HTIT Tracker LoRa ESP32 Meshtastic
349,00 kr
20 in stock
Quantity
Development board for your radio project. See specifications and package contents below.
Dispatched from Aarhus, Denmark. Shipping calculated at checkout.
Need help choosing? Ask us about your project
Heltec HTIT Tracker LoRa ESP32 Meshtastic
349,00 kr
Wireless Tracker Development Kit / ESP32-S3 LoRa GNSS Tracker
Wireless Tracker: Positioning and Wireless Connectivity
The Wireless Tracker development kit is based on the ESP32-S3FN8 and combines an SX1262 LoRa radio with a UC6580 GNSS receiver for IoT positioning projects. It can determine the position of an attached device and transmit data using WiFi, Bluetooth or LoRa. It also supports suitable Meshtastic firmware. Use tracking only where you have the necessary permission.
With L1 + L5/L2 and combined positioning using GPS, GLONASS, BDS, Galileo, NAVIC and QZSS, this device supports a range of tracking projects. Arduino compatibility helps you start development with familiar tools, whether monitoring your own vehicles, equipment or other authorised applications.
Technical specifications
| Parameter | Description |
|---|---|
| Main chip | ESP32-S3FN8 (Xtensa® 32-bit LX7 dual-core processor) |
| LoRa chipset | SX1262 |
| GNSS chipset | UC6580 |
| Frequency | 863-928MHz |
| Maximum transmit power | 21 ± 1 dBm |
| Maximum receiver sensitivity | -134 dBm |
| Wi-Fi | 802.11 b/g/n, up to 150Mbps |
| Bluetooth LE | Bluetooth 5, Bluetooth mesh |
| Hardware resources | 7×ADC1, 2×ADC2; 7×Touch; 3×UART; 2×I2C; 2×SPI etc. |
| Interface | USB Type-C; 1.25mm lithium battery connector; LoRa ANT (IPEX1.0); 2×18-pin (2.54mm) headers |
| Battery | 3.7V lithium battery power and charging |
| Operating temperature | -20 °C ~ 70 °C |
| Dimensions | 65,48 × 28,06 × 13,52 mm |
Built-in LCD display
The integrated 0.96-inch 160×80 dot-matrix LCD can display system status, parameters and battery level. It lets you monitor a project without adding a separate display, including while on the move.
Meshtastic network support
Meshtastic support lets you build wireless mesh networks for communication without a mobile network. Range depends on installation and radio conditions. It is useful for outdoor messaging or communicating between nearby nodes.
USB Type-C
Power, firmware upload and debugging use the USB Type-C interface, making development convenient with compatible data cables.
Integrated UC6580 GNSS chip and antenna
The UC6580 is an L1 + L2/L5 GNSS chip supporting combined positioning with GPS, GLONASS, BDS, Galileo, NAVIC and QZSS.
What is included?
- 1x Wireless Tracker development kit
Warranty and shipping
We do our best to test all electronics before sending them to you.
This helps us maintain quality and avoid unnecessary trouble during development. Faults can occur, but we encounter them very rarely. If there is a problem with the equipment you ordered, you can always contact us, and we will gladly help you resolve it.
We dispatch from Aarhus to Denmark and Sweden. Shipping options and prices are shown at checkout. Delivery time depends on availability, destination and shipping method; contact us before ordering if you need an item by a specific date.
